Free visual inspection and a written scope of work before any mitigation begins - photos, moisture readings, and drying logs go in your claim file
The scope we write is the scope we bill. Anything new gets shown to you, in writing, before we touch it.
Before
After
Before
After
Before
AfterFast, Reliable Mold Remediation Across Palm Beach
Mold remediation in Palm Beach typically runs $2,800-$7,500 for most residential jobs, with full-service estate work on Mizner-era properties ranging higher depending on Landmarks Commission requirements and the extent of historic fabric affected. Our crews are dispatched from our South Florida office and can be on-site anywhere on the island the same day you call. If you’re smelling musty air in an Estate Section villa or seeing discoloration behind custom millwork in an oceanfront condo, call (754) 227-6524. We’ll send a written scope and price before any work begins, and we’ll document every step.
Palm Beach isn’t like the mainland. The seasonal rhythm of this island, the salt-laden air rolling off the Atlantic, and the regulatory weight of the Landmarks Preservation Commission all change how mold work gets done. We’ve restored properties from Via Bellaria to the South End, and we know the difference between drying coral stone and drying drywall.
Why DryMark Restoration Boynton Beach Is Palm Beach’s Preferred Mold Remediation Company
We’ve worked Palm Beach long enough to know the local failure modes. The seasonal estate sitting closed from May through October, the supply-line leak feeding lime plaster for ten weeks before anyone walks through the door. The oceanfront high-rise where building management coordinates pack-out access and every hour of elevator time is scheduled. These aren’t hypotheticals for us. They’re the conditions we plan for.
Our response time to Palm Beach is same-day on emergency calls, with live phone coverage 24 hours a day, 7 days a week. No voicemail trees. No next-business-day callbacks while moisture is still moving through pecky cypress framing.
Every job we take in Palm Beach comes with a written price before work starts, a photo record on every visit, and daily moisture logs documented to IICRC standards. Our technicians are background-checked, uniformed, and licensed, with equipment from Dri-Eaz, Phoenix, and Injectidry deployed according to assembly-specific drying curves. The 365-Day Done Right Promise applies here the same as everywhere we work: if it’s not done right, we make it right.
We also offer a Free Second Opinion on any competitor’s written estimate. Bring us another company’s scope and we’ll review it at no charge.
Our Mold Remediation Services in Palm Beach
Mold Inspection & Testing
Our Palm Beach inspections start with moisture mapping, not guesswork. We use thermal imaging and calibrated moisture meters to find the water source that’s feeding the mold, whether it’s a slow supply-line leak behind coral stone in an Estate Section villa or humidity infiltration in an oceanfront condo’s HVAC chase. Air and surface samples go to an independent lab; we don’t interpret our own petri dishes. In Palm Beach, we pay special attention to secondary salt corrosion on HVAC coils and electrical panels, which can create new moisture sources weeks after the primary event is dried.
Mold Removal
Removal in Palm Beach means containment first, then source-controlled extraction of contaminated material. On Mizner-era estates, that extraction is governed by the Landmarks Preservation Commission: coral stone, pecky cypress, and hand-painted Spanish tile often cannot be swapped for modern equivalents. We document pre-loss condition with photo records, treat salvageable historic fabric with antimicrobial applications appropriate to the material, and replace only what’s legally and structurally necessary. In oceanfront high-rises, removal coordinates with building management on pack-out, elevator scheduling, and protection of common areas.
Black Mold Remediation
Stachybotrys and other toxigenic species require full containment, negative air pressure, and HEPA filtration. In Palm Beach’s seasonal estates, black mold often establishes deep inside thick lime plaster and cypress framing during the summer vacancy months, making surface-visible remediation insufficient. We run wall-cavity drying with Injectidry systems, log vapor pressure differential daily, and don’t sign off until moisture readings confirm the assembly is below 16% wood moisture equivalent. Every step is photo-documented for insurance and, where required, Landmarks Commission review.
Air Quality Restoration
After remediation, we don’t just hope the air cleared. We measure it. Our Palm Beach air quality restoration includes post-remediation air sampling, HVAC system cleaning and coil treatment (with attention to salt-corrosion damage), and whole-structure dehumidification to prevent re-establishment. For seasonal residents heading north, we provide a closed-up moisture plan: target humidity levels, ventilation schedule, and remote monitoring options so the property doesn’t sit blind for another summer.
Moisture & Humidity Control
Controlling moisture in Palm Beach means accounting for the island’s dual-front exposure. Storm surge can push saltwater from the Atlantic and the Lake Worth Lagoon simultaneously, and salt-laden onshore winds accelerate corrosion that creates secondary moisture sources. We install and monitor professional-grade dehumidification from Phoenix and XPOWER, sized to the structure’s volume and the assembly’s drying curve. For historic estates, that means low-grain refrigerant dehumidification that won’t over-dry and crack lime plaster. For high-rises, it means coordination with building engineers on common-area HVAC integration.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Before
AfterTrusted Brands We Service in Palm Beach
Our equipment inventory includes professional-grade drying systems from Dri-Eaz, Phoenix, and XPOWER, with Injectidry wall-cavity and hardwood floor drying systems for the specialized assemblies common in Palm Beach. We stock antimicrobial treatments formulated for historic masonry and wood, not just standard drywall applications. Parts and replacement components are held in our South Florida inventory for fast turnaround on Palm Beach jobs, where Landmarks Commission timelines and seasonal owner schedules don’t allow for back-order delays.
Common Mold Remediation Problems We See in Palm Beach Homes
- Seasonal vacancy hiding slow leaks. Palm Beach estates often sit empty May through October. A supply-line leak or post-hurricane intrusion can feed mold for two to three months before anyone detects musty air or lifted tile. By then, colonies are established deep in lime plaster and pecky cypress.
- Landmarks Commission restrictions on historic fabric. Standard swap-and-replace protocols that work on mainland drywall jobs are legally and architecturally unacceptable on Mizner-era estates. Coral stone, lime plaster, and cypress timbers must be restored with period-appropriate materials, requiring specialized trades and documentation.
- Saltwater corrosion as secondary damage. Salt-laden onshore winds corrode HVAC coils, electrical panels, and structural fasteners. Crews who dry the obvious water intrusion and leave miss this hidden cost, which surfaces as new moisture sources weeks later.
- Dual-front flood exposure on the barrier island. Storm surge can push ocean water over the dune line and Intracoastal water across western streets at the same time. Drying curves calibrated for inland Palm Beach County construction won’t match how Mizner-era masonry and plaster release moisture from two directions.
Pricing for Mold Remediation in Palm Beach, FL
Mold inspection and testing in Palm Beach typically runs $350-$650 for a standard residential assessment, with comprehensive moisture mapping and air sampling on larger estates ranging $800-$1,400. Contained mold removal for a single affected room generally falls between $2,800-$4,500. Full-structure remediation on Mizner-era properties with Landmarks Commission oversight, extensive historic fabric treatment, and secondary salt-damage mitigation can range $6,500-$12,000 or more depending on square footage and material complexity.
What moves the price: the extent of hidden moisture in wall cavities and framing, the presence of toxigenic species requiring enhanced containment, Landmarks Commission documentation and period-appropriate restoration requirements, and secondary salt-corrosion damage to HVAC and electrical systems. High-rise jobs add building management coordination and common-area protection costs.
We deliver a written price before any work begins, every time, with no scope-creep additions once the crew is inside. Haven Standard, Clause 1. Estimates are free. Call (754) 227-6524.
We Also Serve Cities Near Palm Beach
Our crews work throughout the Palm Beach County corridor, including Palm Beach proper, West Palm Beach, North Palm Beach, Greenacres, and Palm Beach Gardens. Dispatch and scheduling are coordinated from our Miami office, with local crews serving each area. If you’re searching for Mold Remediation coverage in any of these communities, the same documentation standards and written-price guarantee apply.
Serving Palm Beach, FL - Our Local Coverage Area
We’re based in the Palm Beach area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Mold Remediation in Palm Beach
Most Palm Beach estates are seasonal residences, with owners typically present November through April and properties closed up the rest of the year. A summer pipe burst or post-hurricane moisture intrusion can feed mold colonies for two to three months before anyone enters the house to smell musty air or see lifted tile. By then, the mold has established deep inside Mizner-era lime plaster and pecky cypress framing, making remediation more extensive than a surface-visible problem would suggest. If you’re returning to a closed-up property, call (754) 227-6524 for moisture mapping before you assume the air is clean.
Yes, and in many cases the Town of Palm Beach Landmarks Preservation Commission requires it. We document pre-loss condition with photo records, treat salvageable coral stone and lime plaster with assembly-appropriate antimicrobial applications, and use low-grain drying curves tuned to historic materials rather than aggressive air movement that would crack plaster. Replacement with period-appropriate materials happens only where the fabric is structurally unsound or legally non-compliant. On a 1920s Mediterranean Revival estate off Via Bellaria in the Estate Section, we contained the affected cabana bath, ran Injectidry and Phoenix dehumidification for coral stone and cypress, and matched the hand-painted Spanish tile and plaster finish so the room read as original.
Saltwater changes both the immediate damage and the hidden secondary losses. Storm surge on this barrier island can push ocean water over the dune line and Intracoastal water across western streets simultaneously, so a single structure may contain Category 3 water from two directions. More insidiously, salt-laden onshore winds corrode HVAC coils, electrical panels, and structural fasteners at rates inland Palm Beach County doesn’t experience. We treat salt corrosion as a separate secondary loss, not an afterthought, and document it for insurance. Drying curves are calibrated for salt-affected masonry and plaster, which release moisture differently than freshwater-soaked drywall.
High-rise remediation adds coordination layers that estate work doesn’t require. Building management controls pack-out access, elevator scheduling, and common-area protection. Custom millwork, stone flooring, and integrated smart-home systems inflate both scope and liability. We work within the building’s engineer-approved containment plan, protect corridors and elevators, and schedule disruptive work around owner occupancy patterns. The same documentation standards apply: written price before work begins, photo record on every visit, daily moisture logs, and the 365-Day Done Right Promise.
It starts with a written estimate, not a verbal ballpark. We inspect with moisture meters and thermal imaging, collect air and surface samples for independent lab analysis, and deliver a scoped price before any containment goes up. Work proceeds through source containment, moisture-source elimination, affected material treatment or removal per Landmarks Commission requirements where applicable, HEPA air scrubbing, and post-remediation verification sampling. You receive daily drying logs, a photo record of every visit, and a signed 365-Day Done Right Promise under The Haven Standard. Call (754) 227-6524 to schedule an inspection.
Ready to get started? Call DryMark Restoration Boynton Beach at (754) 227-6524 for a free estimate. We’ll deliver a written price before any work begins, document every step, and stand behind the result with our 365-Day Done Right Promise.
Written by Alicia Brennan, Owner at Back to Dry Restoration, serving Palm Beach since 2011.